All About Concrete Daily Digital

5 Steps for a Safe Concrete Removal on Your Property

Apr 29

Doing a concrete removal on your property can be a daunting task. It's heavy, it's bulky, and it can be extremely difficult to move. If done incorrectly, it can also be very dangerous. That's why it's important to take the necessary precautions to ensure that the process goes as smoothly as possible. In this blog post, we will outline five steps that you can take to safely remove concrete from your property. Following these tips will help minimize the risk of injury and make the process easier for you!

Things to Consider Before Concrete Removal

Before you begin the process of removing concrete, there are a few things that you need to take into consideration. These include:

The Thickness of the Concrete Slab

It's important to know how thick the concrete slab is that you'll be removing. This will determine if you can break it up into smaller pieces or if you're going to need power tools and experience for the job. If the slab is 4 inches thick or less, you can probably handle the job yourself. However, if it's thicker than that, you'll need to enlist the help of a professional.

Do You Have a Reinforced Concrete?

While there are types of reinforced concrete that can be handled by bolt cutters, concrete that's thicker than a wire wish would require the need of an electric saw. This is a job that's best left to the professionals as it can be extremely dangerous. You can check for your concrete by breaking off an edge or corner and looking for metal rods or wires inside.

Utilities Under Your Concrete

If there are any utilities running under your concrete, you need to be extra careful. This includes things like water, gas, and electricity. Make sure to contact your local utility company or call 811 to find out if there are any lines running under your concrete before you begin breaking it up. If there are pipes or wires running under your concrete, a professional will need to handle the job.

Concrete Removal Tools and Materials

A concrete removal project will require a few tools and materials. These include:


  • Shovel
  • 12 to 20-pound sledgehammer
  • Pry bar
  • Bolt cutters
  • Mattock or Pickaxe
  • Jackhammer (for thicker concrete)
  • Wheelbarrow or hand truck

Additional Materials:

  • Heavy-duty Gloves
  • Safety Goggles
  • Heavy Boots
  • Dust Mask
  • Hearing Protection
  • Plastic Sheeting

5 Steps for a Safe Concrete Removal

Now that you know what you need to consider before removing concrete, it's time to get started on the project! Follow these five steps to safely and effectively remove concrete from your property:

Step 1: Create a Space Under the Concrete

When it comes to breaking up concrete, the first step that you need to do is to create space underneath the concrete slabs. By creating this space, you are able to remove the cushion that can absorb the impacts of your blows, making it easier to crack and break the concrete. One way to do this is by digging underneath the slab from the side and prying it free as you begin to make cracks.

This technique, called undermining, is an effective way to loosen and weaken the concrete so that it can be broken more easily. With a little bit of elbow grease and careful planning, you can create a space underneath the concrete that will make breaking it up much simpler.

Step 2: Hammer Time!

Once you have created a space underneath the concrete, it's time to start breaking it up! Begin by striking the concrete with a sledgehammer to create cracks. Once you have a few cracks, use a pry bar or sledgehammer to break the concrete into smaller pieces.

Remember to wear gloves and safety goggles while you're working! It's also a good idea to cover the area with plastic sheeting to contain the dust and debris.

If the concrete is thick and calls for a jackhammer or a heavy-duty power tool, hearing protection is a must! This type of equipment can be extremely loud and dangerous, so it's important to take the necessary safety precautions.

Step 3: Pull Apart the Broken Sections

With the use of a pry bar or a mattock, start pulling the broken sections of concrete apart. If there's a wire mesh in the concrete, you can use bolt cutters to remove it. You can use a wheelbarrow or hand truck to remove the pieces from the work area. If you're working on a large section of concrete, it might be necessary to rent a Bobcat or other type of excavating equipment.

Step 4: Repeat the Steps as Necessary

Depending on the size of the concrete slab, you may need to repeat steps two and three until the entire section becomes loose and movable. It's important to take your time and work carefully so that you don't injure yourself or damage any underground utilities.

Step Five: Clean Up the Area

Once you have removed all of the concrete, it's time to clean up the debris and all of your tools. You can start by putting away the tools that you won't need. You can then start sweeping up any dust and debris to prepare the area for the next step in your project.

If you've shut off any utility lines, now is the time to turn them back on. You can check with your provider to see if there are any special instructions that you need to follow. I

If there are any holes that you need to fill in your property, the rubble from the concrete can be used as fill material. Simply compact it in place and you're all set.

These are the five steps that you need to follow in order to safely and effectively remove concrete from your property. Remember to take your time, wear the proper safety gear, and have a plan for disposing of the debris. With a little bit of effort, you can successfully remove concrete that's been unwanted for years.

Not Sure if You Can Handle the Job?

Removing concrete can be a big job, but with the right tools and a little bit of know-how, it's something that most people can do themselves. However, if you're not sure that you're up for the task, there are professional concrete removal companies that can do the job for you. They have the experience and equipment to safely remove concrete from your property, so you don't have to worry about it.

Whether you decide to do it yourself or hire a professional, removing concrete can be a big job. But with the right preparation and safety precautions, it's something that anyone can do.

If you're in the Denver, Co, or a nearby area and looking for reliable and professional concrete removal services, Denver Concrete Inc. can help you out. They have years of experience with concrete removal and can handle any size job. They've been known for their quality workmanship and fair concrete removal prices. Feel free to check out their website to learn more about their services: